Cccam 2 2 1 Enigma2 Spark 8900

Posted : admin | On 15-09-2021

Here we shall install the Emu’s including CCcam to Spark.

First thing to do is delete all your installed Emu plugins.
Click Menu -> Plugin and click the Green button to delete each one.
On new firmware you will also need to enter the Password: 0 0 0 0

Here's the easiest / simplest method to increase the flash memory of your spark 7162 or any other enigma2 receiver. This method is best for Spark and Old DreamBox receivers. Note: By this way you can shift many folders like; cam folder, keys folder, skins folder, plugins folder etc your receiver flash memory to USB / Hard Drive. Amiko Alien Images Enigma2 & Spark - Any information provided on this site is not guaranteed in any way. Some articles may discuss topics that are illegal, so this information is provided for educational purposes only, your use of the content, downloads and files, or any part thereof, is made solely at your own risk and responsibility.

Now you will need to downloademu_plugin.zip the emu_plugin file [ emu_plugin.zip ]
Once you have downloaded and unzipped the emu_plugin.zip
Place the folder ‘plugin’ onto a USB stick [Formatted in FAT32] and insert the USB stick into the USB port on the rear of the receiver.

You will then see a popup window, click Yes to install

Now open DCC, [Cick Here]
When setting up the Configuration use the following logon data:

Username:root
Password:root

Once a connection has been established, click FTP
Now click var -> /root/plugin/var

Now click on Keys

Now select on your CCcam.cfg file and click on the transfer button

When asked to overwrite click Yes

You can check the CCcam.cfg file is correct, by clicking on it and then click View
If you need to edit the file you can do so by clicking the Edit option.

Once your happy the CCcam.cfg file is okay, you can close DCC.

Now click Menu -> Plugin

Select CCcam214 and click the Enter button, this will start the emu.
You will see it has been started as the Red Off icon will change to Green.

Now you have started the CCcam Emu, you can exit.

Now let us check all is working correctly,
Select an encrypted channel you know your cline will open,
for this example we shall select Calle 13

Once selected click Enter to view the channel.
If you followed the above correctly, you should now get access to the channel.

Do you have Enigma2 in your Amiko Alien/Alien2 (STi 7111/7162)? If not, just in case one hasn't yet made it dual boot with Enigma2, here it is.

Do you have E2 in your Alien/Alien2 (STi 7111/7162)? If not, just in case one hasn't yet made it dual boot with Enigma2, here it is, thanx to @popssad (edited a bit by me):


INSTALLING ENIGMA2 USING SPARK PLUGIN IN AMIKO ALIEN/ALIEN 2


There is a video for it, too:


Preparation:


USB stick formatted to FAT32

Spark Mini Plugins pack for the Amiko Alien/Alien 2 (attached)

Enigma2 Firmware for the Amiko Alien/Alien 2, say here: Please login to see this link.


1) Download the Plugin Pack (and much more) here: Please login to see this link. or see attached.


2) Insert a USB stick into your computer, open the Plugin Pack file you just downloaded and extract the complete plugin directory from the .zip or .rar file to the root of the USB stick (which must have been pre-formatted to FAT 32).


3) Now, safely remove the USB stick from your computer and with your Amiko Alien/Alien 2 receiver powered on and connected to your TV, insert the USB stick into a USB port on Amiko Alien/Alien 2 (either front or rear USB port will work in the case of the Alien 2 - just ensure you have no other USB devices connected at the time).


4) Within a few seconds the Amiko Alien/Alien 2 receiver will read the USB stick and then automatically prompt you on-screen saying ‘Confirm Do you want to upgrade plug in?’ – Select YES using the remote control arrow keys and then press OK on the remote control. This will now display the ‘Upgrade from USB’ menu and the update will start automatically which will only take a few seconds and once complete will automatically reboot your receiver. At the point of reboot you can now remove the USB stick from the Amiko Alien/Alien 2 (if you don’t then the receiver will keep prompting to update after each reboot - you can just click no though if you wish).


2-2-1 Press

5) When your Amiko Alien/Alien 2 receiver has finished booting back up you should now be back to the usual Spark firmware but there we'll now have several plugins that have been installed which can all be found by selecting MENU > Plugin using the remote control.


At this point you are now half way there, we have all the tools required to install Enigma2 firmware via Spark so we just need to get the Enigma2 firmware itself.


6) Download and save your required Enigma2 firmware of your choice for Amiko Alien/Alien 2 to your computer.


7) Insert a USB stick into your computer, open the Enigma2 firmware file you just downloaded and extract the two files from the .zip or .rar file to the root of the USB stick (which must have been pre-formatted to FAT 32). These files will be named uImage and e2jffs2.img.


8) Now remove the USB stick from your computer and with your Amiko Alien/Alien 2 receiver powered on and booted to Spark and connected to your TV, insert the USB stick into a USB port on Amiko Alien/Alien 2 (either front or rear USB port in the case of the Alien 2).


9) Within a few seconds the Amiko Alien/Alien 2 receiver will read the USB stick. After a few seconds using the remote control go to MENU > Plug in > plugin_e2upgrade.s and while this is highlighted press the OK button which should take you straight to the Enigma2 Update menu.


10) Make sure the Update path is showing as /storage/c/ (provided the two files were saved to the root of your USB stick) and then press RED (Enigma2 Update). You should see a pop up on-screen re. updating Enigma2, warning you not to power off the receiver (this is all automated functions and messages – you don’t need press and keys at this point).


11) After a short while the message will disappear and you will be returned back to the Enigma2 Update menu – at this point you are actually finished and Enigma2 is now flashed, so you can exit all menus and reboot the receiver.


12) To make the receiver boot into Enigma2 mode


-power down the receiver at the back switch and then

-power up the receiver again

-while pressing and holding the OK button on the front of the receiver,

-until FORCE is shown on the front screen, then

-press the down arrow (to see Enigma2) on the front of the receiver and then

-press OK.


Your Amiko Alien/Alien2 will then boot into Enigma2 and it will boot to this mode each time as default!


13) To change back to Spark as the default


Cccam 2 2 1 Enigma2 Spark 8900 Manual

Basically, the reverse procedure should be done now. Using the FORCE function during the booting up, make the receiver boot into Spark mode:

Cccam 2 2 1 Enigma2 Spark 8900


-press and hold the OK button on the front of the receiver,

-until FORCE is seen on the front screen, then

-press the up arrow (Spark) on the front of the receiver and then

-press OK on the front of the receiver.


Mutiple Enigmas2 in your Alien/Alien2 using Image Manager


Once you have Enigma2 image in Alien2 flash - you can do this: Please login to see this link.


Cccam 2 2 1 Enigma2 Spark 8900 Manual

Using this excellent plugin one can install 3 - 4 images on a USB stick easily.


The other USB port one can use for the external, USB connected HDD.


Enjoy!


Cccam 2 2 1 Enigma2 Spark 8900 Driver

Please login to see this link.

Cccam 2 2 1 Enigma2 Spark 8900 For Sale

Please login to see this link.